If you’re simply getting into the field of building service upkeep or workplace cleaning you’re sure to deal with the choice of whether to use a floor buffer or a floor scrubber for your floor cleaning tasks. You may believe initially “these must be the same sort of device, right?” Well, not really.
Typically, a flooring buffer is a device that has a horizontally rotating head that sits directly on the flooring. Think about a big, round scrubbing pad spinning in a circle. The spinning of the pad is powered by a small motor, normally directly over the center of the pad. Some buffers come geared up with a solution tank that can squirt the cleaning option directly into the scrubbing pad and onto your floor.
This extra feature enables the user to put small quantities of cleaner on the floor as required, without having to stop and pour it straight out of a bottle– a real-time and back saver. But, there is no other way for a buffer to “vacuum up” that service once it’s on the flooring. Check Ride on scrubber.
Floor buffers are likewise called rotary flooring devices because the scrubbing surface is continuously turning in a circle in one direction. Automatic flooring scrubbers MAY have a turning head, similar to buffers, but lots of designs use a round brush head. We’ll deal with that distinction in a minute. Feel in one’s bones that you’ll encounter the terms “floor buffer” and “rotary floor machine” as suggesting the very same thing.
Buffers are made to spin at a variety of speeds. The speed at which the pad or brush turns directly impacts the type of floor cleaning task you want to do. Low-speed buffers are created to handle scrubbing tasks when your floor has in-ground dirt that you need to put some muscle into scrubbing away. Low-speed machines are likewise your machine of choice when you require to strip off the old wax finishing from a tough surface area, like commercially tiled floorings you typically find in grocery stores. Low-speed buffers will turn from about 175 rpm. Variable speed buffers will go from about 175-350 rpm.
Low-speed buffers are also suitable for scrubbing – or bonneting – carpeting, provided the maker has enough horsepower (or double capacitors) to deal with that type of high-friction rotation. Ensure to follow the manufacturer’s guidelines for whether a floor buffer can be utilized for carpeting or not. Numerous makers will void your guarantee if you’ve utilized a machine on carpeting that’s not supposed to be utilized that way (do not worry, they’ll be able to tell if you send your device in for guarantee work!).
High-speed buffers are developed just for polishing hard floor surfaces. They rotate at very high speeds, anyway from about 1000 rpm to 3000 rpm. You CAN NOT use high-speed buffers for any kind of scrubbing work. With the right polishing pad and a little buffing spray, you can bring a fantastic shine to a difficult flooring surface. You just can’t do that with a low speed or variable speed device.
Many flooring buffers run from a direct connection to a power source, but some have internal batteries or a propane-powered engine to propel the turning pad. The benefit of a battery or propane-engine type design is being free of power cables interfering with your scrubbing job. The advantage of the electric models is a continuous source of power without having to worry about draining a battery or fuel tank. Battery-powered designs are often used in LEED and green structure maintenance programs.
Floor scrubbers, likewise referred to as automatic floor scrubbers or car scrubbers, are a whole various animal. They not only have a scrubbing head but an automatic system for dispensing cleansing option and then vacuuming it up. In one pass over your flooring, you can dispense cleaning or removing solution, scrub it into the flooring, and vacuum it all up with a squeegee attachment at the back of the device. Car scrubbers have a separate dispensing tank and a collection tank to keep your clean water from your dirty water.
Even though automatic scrubbers are typically more pricey devices in advance, the time conserved in cleaning your floorings could very well off-set that preliminary expense. Conserving operator time (and money) is the most frequent factor for purchasing these effective machines for constructing upkeep programs.
In the end, there are numerous factors to consider in deciding which type of maker, a flooring buffer, or a flooring scrubber, is finest for your particular situation. If you have a large facility with both wide-open areas (like the middle of a mall) and tight areas (like in bathrooms) then perhaps your finest tool for the job is BOTH sort of devices.